This Simple to use 4K HDR 4 x 4 HDBT Matrix allows you to send up to four HDMI sources to one HDMI Display and three others via HDBT transmitters and receivers (Included).
It will support resolutions up to the full 18Gbps 4K 60 Ultra HD 4:4:4 and supports high resolution digital audio formats such as LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio.
Perfect for locating you video components such as MySky box, Bluray players, Apple TVs, etc in a central location and then distributing them out to multiple TVs around the house or office.
- 1 x HDBT 4×4 Matrix Switcher
- 3× HDBaseT receivers
- 2× Mounting Ears (Matrix)
- 6× Mounting Ears (Receiver)
- 4× Phoenix terminals (male)
- 8× Wideband IR Receiver cables
- 8× Wideband IR Blaster cables
- 1× 24V/2.7A Locking Power Adaptor
- 1× IR Remote control
- 1× User Manual
|1||LED||When device is in standby mode, the LED light in red. LED is blanking when device is working normally.|
|2||Nixie tube||Displaying output port corresponding input source.|
|3||IR||IR receive window.|
|4||POWER button||Power on/off button.|
|5||OUTPUT button||A/B/C/D output channel button.|
|1||HDMI INPUT||Connect to the HDMI source device, such as DVD player or Set top box.|
|2||OUTPUT||HDMI||Connect to the HDMI display devices, such as TVs or Monitors.|
|HDBaseT||Connect to HDBaseT receiver comes from the
same package. Don’t connect to a projector directly that built-in HDBaseT input port since 24V POC may destroy this projector.
|OPTICAL||Digital audio de-embedding output.|
|L/R||Analog L/R audio de-embedding output.|
|4||IR EXT||If the front IR sensor of unit is obstructed or the unit is installed in a closed area out of infrared line of sight, the IR receiver included can be inserted into the IR EXT port at the rear to extend the IR sensor range and enable local of the matrix.|
|5||IR INPUT||IR receiver port, connect an IR receiver cable.|
|6||IR OUTPUT||IR blaster port, connect an IR blaster cable.|
|7||CONTROL||LAN||Connect to an active Ethernet link with an RJ45 terminated cable.|
|RS-232||Connect to an PC or control system for control via a Phoenix terminal to transmit command.|
|8||Power port||Plug the 12V DC power supply into the unit and connect the adapter to AC wall outlet.|
1.Press this button to power on the matrix or set it to standby mode.
2. Press these buttons to select output A, B, C, D for input 1, 2, 3, 4 ports.