Aeon’s simple to use 1080p 4 x 4 Matrix allows you to send up to four HDMI sources to four HDMI input displays. This 1080p 4×4 matrix comes with 4 receivers that can extend the HDMI signal up to 50m via Category cable.
It will support resolutions up to 1080p and supports high resolution digital audio formats such as LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio.
Perfect for locating you video components such as CCTV, MySky box etc in a central location and then distributing them out to multiple TVs around the house or office. This 1080p 4×4 matrix comes equipped with a remote control so you can control the matrix with ease.
- LCM: Display the information of each input and output setting and EDID management.
IR: IR Receiver window (accepts the remote control signal of this device only).
POWER: Press this button to power the device on/off. The LED will illuminate green when the power is on, red when it is in ‘Standby’ mode.
LOCK: Press this button to lock all the buttons on the panel, press again to unlock.
OUTPUT/INPUT: Press the OUTPUT and INPUT button to select the output corresponding input.
For example: Press OUTPUT ALL > INPUT 1, The OUTPUT A, B, C, D will be set to INPUT 1.
Press the PTP button, The OUTPUT A, B, C, D will corresponding INPUT 1, 2, 3, 4.
EDID: Smart EDID management, the LCM will display the EDID operation.
Press the MENU button enters the EDID management window.
Press UP or DOWN button to select the needed EDID setting.
Press the ENTER button to download EDID into the input source, it can easily download any EDID setting to an input port.