Fibre Extender – HDEF4K

$1,395.00

Fibre Extender

The HDEF4K supports up to 4K2K@60 resolution (YUV4:4:4).

Specifications:

  • HDMI 2.0 version (Supports HDMI 2.0, 4K60, 4K30, 1080P, 1080i, 720P and standard video format.).
  • Extend 4K signal up to 1000m (Single Mode) or 300m (Multi Mode)
  • Supports 3D Video.
  • HDCP 2.2 compliant.
  • SFP – LC Input
  • LED indicators.
  • Local IR, RS232 Control
  • Supports Dolby True HD, DTS-HD, Dolby 5.1, DTS 5.1 and all PCM

DOWNLOAD CUTSHEET

- +
Compare
SKU: HDEF4K Categories: ,

The HDMI over Optical 4K Fiber Extender can extend HDMI signal up to 4K Ultra HD over 3300 feet/1000 meters (Single-mode cable) or 1000 feet/305 meters (Multi-mode cable) to an HDMI compatible display.

This SFP module supports both single and multi-mode fibre cables, giving you the ultimate flexability.

Aeon’s 4K fibre extender also supports bi-directional infrared control and RS-232 signals transmission. It can allow you to easily control your source at the TV side or control your TV at the source side when using this extender. Using the HDEF4K 4K Fibre Extender can be beneficial in high interference environments (as fibre cables do not induct electricity) and or if you need to run long distance video without loss of bandwidth.

RECEIVER

 

 

 

  1. Power LED
    System power indicator
  2. Optical LED
    Optical Link indicator, illuminates when transmitter and receiver has established optical link
  3. HDMI LED
    HDMI output connecting indicator, illuminates when HDMI output has an active TV connected.
  4. DC 5V
    Connect 5v Power Supply.
  5. Optical
    Connect to transmitter with a single or multi-mode fibre cable
  6. HDMI Out
    Connect to an HDMI display device
  7. IR In
    Connect to an IR receiver cable and put IR receiver header close
  8. IR Out
    Connect to an IR emitter cable and put IR emitter close to source’s IR receiver
  9. RS-232
    RS232 commands will pass through this extennder
  10. Update
    Firmware update port

TRANSMITTER

  1. Power LED
    System power indicator
  2. Optical LED
    Optical link indicator illuminates when transmitter and the receiver establish an optical link.
  3. HDMI LED
    HDMI input signal indicator illuminates when the HDMI input has an active signal
  4. DC 5V
    Connect 5v power supply
  5. Optical
    Connect to receiver with a single or multi-mode fibre cable
  6. HDMI In
    Connect to an HDMI source device
  7. IR IN
    Connect to an IR receiver cable and put IR receiver header close to display device
  8. IR Out
    Connect ot an IR emitter cable put IR emitter close to devices IR window.
  9. RS232
    RS232 commands will pas through this extender
  10. Update
    Firmware update port